Metal Scrap

HMS 1&2 (80/20) IRSI 200-206

ISRI USA GOST 2787-75 Russia HMS 1&2 (80/20) 
IRSI 200-206Steel scrap defined as HMS 1 & 2 in an 80/20 mix under IRSI codes 200 through 206. Non- metal impurities total 1 % (one percent ) or less - no radiation, arms, ammunition, bombs, shells, mines, cartridges, sealed gas cylinders. High carbon steel is not included in this scrap -we sell that as a separate item.
HMS 1 - IRSI CODES
HMS 1 - IRS I Code 2 00: Heavy melting steel. Wrought iron and/o r steel scrap ¼ inc h or steel scrap ¼ inch and over in thickness. Individual pieces not over 60 x 24 inches (charging box size) prepared in a manner to insure compact charging.
HMS 1 - IRS I Code 2 01: Heavy melting steel 3 feet x 18 inches. Wrought iron or st eel scrap ¼ inch over in thickness individual pieces not over 36 inches x 18 inches (charging box size) prepared in a manner to insure compact charging.
HMS 1 - IRS I Code 2 02: Heavy melting steel 5 feet x 18 inches. Wrought iron or st eel scrap1.4 inch and over in thickness individual pieces not over 60 inches x 18 inches (charging box size) prepared in a manner to insure compact charging.
HMS 2 - IRSI CODES
HMS 2 - IRS I Code 2 03: Heavy melting steel. Wrought iron or steel scrap, blac k and galvanized. 1/8 inch and over in thickness, charging box size to include material not suitable as No.1 heavy melting steel. Prepared in a manner to ensure compact Charging.
HMS 2 - IRS I Code 204: Same as IRS I 203 but ma x size 36x18 inc hes HMS 2 - IRS I Code 205: Same as IRS I 204 but free of sheet iron or thin - gauged Material.
HMS 2 - IRS I Code 206: Same as IRS I 204, but ma x size 60 x 18 inches.
R50- R65 - IRSI CODES
The chemical composition is the standard for R-50 R-65 Tee rails original weigh 50 pounds per yard or heavier, 6 meters long and over. Material to be suitable for rerolling into bars and shapes. Free from bent and twisted rails, frog, switch and guard rails, rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from end of the piece of rail. Free from Fluff, Nonferrous inclusions, excessive rust and other impurities. Free from war and explosives, shells, cartridges, other arms and ammunitions used or otherwise and any closed containers. Free from any radioactive materials, any harmful chemicals, substances, and coatings any organic waste any other harmful substances. Dirt, dust, rust fluff and other impurities not allowed over 0,5 %. The rails are to be neatly bundled and secured with iron wire or straps, provided with adequate lifting hooks. Individual bundles not to exceed 5 MTW.